|

The Perfect Day

Ongoing Project! Check back for updates.

This is the first project post so I apologize if my style comes across “clunky”.  I’ll find my rhythm with time.

A man approached me and asked if I could sink this picture in epoxy for him.

After some back and forth, we decided on this layout with an 8x10 photo, red oak stain.

8x10, sure, but I had not considered aspect ratio.

6 inches isn’t going to cut it.  Larger 8×14 photo paper ordered.

printed picture
Size looks better. I corrected the ink later (see too much yellow in the pic?)
picture with roller mark
Can you see the horizontal line in the reflection about 2/3 of the way up? "Roller Marks". I need to fix this if I can.
not a good picture
I missed taking the pic of the printer exploded into pieces all over my workbench so this pic will half to do. Overall, I'm thinking a piece of plastic warped. Couldn't fix it.

So if you can't fix it... test it!!!

The epoxy light refraction hides the marks.  Should be good to go.

Now that I have the picture size, I know what size to cut the board.

Before stain / After stain

after
Before
After

I'm really happy with the way the stain came out.

Three days later:

spray painting the board
matte board
after board
Before
After

This crack is going to be a problem. We want little to no air cavities behind the picture.

After a 12hr cure and sanding:

Anything shiny or not looking foggy in the black is a depression.

So why not raise it a little more?  I’m still waiting on the clearcoat to settle anyways.  See you again in the early am.

Update: 11/10/26

Went down with two infected teeth, spent 11hrs at UNC Urgent Care.  Surgery scheduled 11/19, antibiotics about the only thing keeping me upright at this point.  Yesterday, Julia struck a deer.

So posting has been erratic but progress has maintained "steady" and the beat goes on.

picture attached to the board
The picture has been applied to the board. Super stressful, if pic is off or rotated, the project is ruined. I took three practice tries with no glue and I'm happy with the final results.
epoxy coat 1
Epoxy coat 1
better view of hydrophobia
It's hydrophobic. See how it pulled back?
Second coat: I'm talking it closer to the edge but it's still shying away.
epoxy coat 3
This is the 3rd coat. See it's coming all the way out to the edge now. Pic was taken wet. Hopefully she stays.
epoxy 3, different angle
See that? Looking good. (at least while it's wet :P).

It's a 12hr cure so nothing new until tomorrow morning, minimum. Enjoy the rest of your day!

Leave a Comment